Nissan Motorsport Parts Catalog for B15/N16

This got posted recently over at MySpecV forum. Looks genuine. Most of the hardcore internal parts are for QR25 engine but some like the 5-speed short shifter and grounding kit will fit our lowly N16. Contact details are provided further below. The the forum posting is located here.

Does anyone have a spare good condition QR25 engine and associate gearbox lying around?

Nissan Motorsports Competition Parts Catalog

Just downloaded this from NNAnet.com. I will list all the B15 parts, along with other necessary information. PM me for any further information you would like.Parts information will be listed as follows:DescriptionPart NumberPrice (if i have gotten it yet)I tried to see if my dealer gets any kind of discount, but unfortunately, we don't. The best thing to do would be to call Nissan Motorsports directly to quote prices or make a purchase. Contact information is at end of post.

Forged racing pistons for QR25DE, 13:1 CR (set of 4)12010-QR25G

Forged H beam connecting rod for QR25DE (set of 4)12100-QR25R$335.33

Piston Ring set for above12033-2J201

Racing connecting rod for QR25DE (set of 4)12100-QR25R$1980.00

Aluminum flywheel for all QR25DE Sentra SE-R and Spec V13210-QR251

High lift, race valve springs for QR25DE. ceramic coated. (set of 16)13203-QR25R

Spin-on adapter for remote oil filter location; can be used with an oil cooler. SR20DE & QR25DE (Big)15238-E1119$25.50

Nissan Motorsports grounding kit, includes 6 grounding wires & instructions, smoked clear heat shrink. Custom fit to Sentra SE-R and Spec V w/ QR25DE.24080-BGNDK

Poly engine mount insert kit QR25DE.99996-1112G

Racing piston and rod kit for QR25DE.99996-QRRSP

Replacement friction kit for aluminum flywheel, 12310-QR25112311-QR251

Short Shift kit for 6 speed Sentra SER and Spec V 10/03+34101-B15S4

Short Shift Kit for Sentra with 5 speed and 6 speed transmission. 2.5 liter engine only 02-0434101-B15SS

Short shift kit for all MT. Attatches to the transmission pivot for a 30% reduction in throws. 2nd piece attatches to shift lever to re-center. 2002+34101-B15S5

Front Hawk 9012 Blue racing brake pad set.41060-HB268

Front Hawk HP+ Autocross brake pad set.41060-HB268N

Stainless steel braided 4-wheel brake line kit, DOT compliant. For use on cars with ABS.46200-22046

MISCELLANEOUSI'm not going to list all the information. PM me for details.

NISMO shift knobs: 10mm threads: polished aluminum, black aluminum titanium, aluminum w/ carbon fiber insert, titanium GT race, JDM special edition-black leather w/ red stitching. 12mm threads: titanium GT race

Spec R emblemgear shift pattern plate: 5 & 6 speed

Nissan decal: black, red, silver, white

Koni strut bump stop, trim to fit

Heat insulation

Auto Math Handbook

Driver suit patch, Nissan Logo

Sentra Spec V GT4/5: fiberglass nose, rear deck lid, LH door panel, RH door panel, hood panel, L 1/4 panel, right 1/4 panel, rear bumper. Lexan rear window. Window surrounds. Latch.

And much more, including race equipment.

CONTACT INFORMATIONToll-Free Order Line: 888.833.3225 9:00 am - 5:00 pm (CST), Monday through Friday24-Hour Fax Line: 615.223.3341email: nmc.race@nissan-usa.com
Address: Nissan Motorspors 610 Enon Springs Road East Smyrna, TN 37167

Data Lost!

Two Sundays ago was one of the worst moments of my life cyber wise. My hard disk suddenly decided to die in a very bad way (controller motor crapped itself out) and I lost thousands of photos of my house, the Slowtra, SP, mods, documents, everything. Even my work Outlook files going back to 2000-20001! Silly me for not having a good external drive for backup..

I've had 3-4 hard disk crashes previously but never this bad. Usually the data can be recovered but the problem now is my hard disk is really dead. Nothing can connect to it! Does anyone know how to salvage data from my kaput h/disk? Small reward (RM150-300 depending on how much can be salvaged) offered. Who wanna try? Am on my knees begging...

Dog III - Interior and Brakes

Interior and dashboard pix from the Dog III. Anything even remotely contributing to weight has been removed. This includes carpeting, sound deadening, ICE and even the stock dashboard itself. Pedals and steering wheel are from Sparco. Boost gauge is from Auto Meter and boost controller a TBC-1 unit from Chris Rado's World Electronics. A GPS track mapping system is also used.

For those safety freaks there's unfortunately there are no airbags. Racecars depend on the roll cage, multi-point harness and driver safety helmet for safety and combined these offer much more protection and safety than any airbag!

Digital dash and data logger are from Racepak Data Systems. The dash model to the top left of the steering wheel is a G2X dash. The dash display tells you your lap time, the overall elapsed time and what lap you are on. The data logger utilizes it's own display unit. There is a shift light on top of the display unit to indicate when to shift gears. The data logger is likely a LDX Logger. TheLDX combines data acquisition with our advanced instrumentation! The LDX Logger also takes full advantage of the capabilities of the V-Net technology. In addition to the wiring harness that imports the signals from the engine RPM, drive-shaft RPM, water temperature, oil pressure, and battery voltage, up to 32 optional sensors modules can be attached to the single V-Net network cable. This yields a total recording capability of 37 channels of data. The LDX Logger can record and upload to a PC the data from all of the monitored sensors, while at the same time displaying the input from up to 21 of those functions on the dash screen. Data loggers are a most valuable and indispensable tool for a driver and race team to playback and analyze the performance of the car to indentify areas for improvement that will contribute to better future laps.

From Mike - Shown below is the Sparco Circuit seat and the Sweet Steering column. The Sweet column saves a bunch of weight and cleans the area under the dash up. The Sparco wheel is covered in foil to avoid greasy finger prints on it. There are a few weird things about the Circuit. The padding in the butt is about 4" thick forcing you to sit very high. I have concerns about the safety of this as well. In a severe crash the foam could compress, causing you to fly out of the harnesses. I am going to be cutting this foam down or beadseating it. Even with the extremly lowered rails, you sit sort of high. We may modify the seat rails more to get the seat as low as possible.

This is the mounting bracket for the Sparco seat. The mounting bracket is fabricated and then directly welded into the stock chassis sheetmetal.

From Mike - The Sweet collapsable steering column. This is made for domestic race cars where the steering box is well forward of the firewall. A bad wreck could drive the column through your chest. On this car the steering rack is on the firewall so if the car crushed that far, the steering column might be the least of your worries. However the 6" of collapsing section is still a big plus for safety.

Gear shifter and brake bias adjustment assembly. From Mike - To fine tune our front-to-rear brake bias, we installed a Tilton Brake proportioning valve from Bits n Pieces Motorsports. This valve allows us to decrease or increase the amount of rear braking power from inside the cabin instantly to compensate for fuel load or driver style.

Pix below of the front brake caliper and rotor assembly

The Dog III is fitted with Stoptech ST40 4 pot calipers and 13" 2-piece (330mm) slotted rotors with an aluminium centre hat up front. The centre hat reduces unsprung weight. The front brakes uses a Performance Friction 01 compound brake pad. I've previously contemplated Stoptech calipers for the SP but boy are they huge in size and won't fit my 16X7" SSR Type Cs. Mike uses lightweight, forged and very expensive Rays Engineering Volk Racing TE37 wheels, sized 17x8 inches with a 38mm offset and the TE37s easily clear the caliper. From Mike - Although the Stoptech brakes are big, they are actually about 6 pounds (2.73kg) lighter than the stock brakes due to the aluminum alloy construction. Per Mike the rear brakes make do with a slotted rotor and Carbotech XP10 compound brake pads. The calipers are stock. Motul RBF600 brake fluid is used. And no, your eyes are not deceiving you. The wheel hubs on the Dog III have been converted to a 5 lug PCD 114.3 bolt pattern.

Stay tuned as I talk about the serious hardcore aero stuff next!

Mike Kojima's Nitto Tyres Sentra Spec V Racecar aka Dog III - Suspension

As promised here are the hardcore porn stuff from Mike Kojima's monster. Photos and tech explanations reproduced with consent from Mike Kojima from his SR20 forum postings. I've added some of my explanations where possible to make understanding easier. Let's start with the suspension..

Aluminum strut bar, Modifed shock towers with camber caster plates and remote reservoirs for the KW Struts/shocks

Andrew - The N16/B15's front suspension strut towers cannot easily accept a camber plate top mount and needs to be cut and a new top rewelded. Not a bolt-on job. Detail explanation in Nitto Tire's blog.

Front KW strut assembly complete with remote reservoir and top camber castor plate. Andrew - And NO.. these are the real deal racing struts and not some Taiwanese or Bolehland knockoffs. You can buy several sets of Tein Super Streets for one of these. The KW damper is 3-way adjustable. The top elongated hole/slot on the strut lower mount means further camber fine tuning.

The rears

Front suspension with adjustable wheelbase, caster, camber, kingpin inclination angle, bumpsteer and roll center. I wanted to make the anti dive adjustable too, but ran out of time, maybe later in the development cycle. Making an adjustable front swaybar was a bitch in this car, see lower endlink mount on the bottom of the control arm, and slot in arm for the endlink. The bar has minimal endlink angularity though. Andrew - anti swaybar is also known as an anti-roll bar. Tie-rod, arb and front lower arm outer pivot (the part where it connects to the hub/upright) are spherical bearing items. Other bushes are from Superpro.

Adjustable rear panhard rod that gets rid of the stock Scott-Russell linkage, roll center height is adjustable via panhard rod. Andrew - the panhard rod assembly is custom fabricated. Again you can't simply buy these parts aftermarket and bolt-on.

Speedway Engineering rear antiswaybar with remotes for KW Shocks. Andrew - anti-roll bar stiffness is adjustable via the holes in the blade. The closer the hole to the arb the stiffer! Like the Nissan N15 DTC racecar the anti-roll bar goes through the spare tyre well

More hardcore porn stuff and "upskirt" shots to follow. Who wanna be the first to mod the Slowtra to similar Supertra levels?

N16 Manual Transmission

Did some research lately on the manual transmission found on all MYDM CKD N16 1.6 variants and found the following information which might interest you below. Pls note all info is cap S-Tune (Saw-Tune) and is the result of my own personal research work. I cannot guarantee 101% correctness so use the info at your own peril!

1. The gearbox model for QG16DE is RS5F70A, model code number 7J006. The gearbox model for QG15DE is RS5F30A. Nissans designation for transmissions is as follows, example RS5F70A:
RS=Remote Shift, FS=Fixed Shift
5=5 forward gears, 6=Forward gears
F= Front drive, R=Rear wheel drive
70=Model designation
A=Standard/open final drive, V=Viscous LSD & H=Helical LSD

2. The gearbox is made by Aichikikai Japan or Aichi Machine Industry Co., Ltd. Apart from transmissions Aichikikai also produces engines for Nissan.

3. The 70A gearbox is a pretty robust unit and is specced by Aichikikai to withstand up to 200Nm of torque. One fellow forumer from OZ Pulsar group told me the gearbox is capable of withstanding 500hp but I honestly wouldn't try my luck so far.

4. The USDM B15 Sentra with QG18DE runs the same manual gearbox. This simply means the same gearbox can be fitted as a "performance upgrade" for Bolehland Sentra XG-Ls. The 70A gearbox is also found in the P11 Primera but with a different bellhousing. This means many other SR20DE engine variants and car models in the Nissan lineup will use the same gearbox combination.

5. TCM Malaysia quotes the following gear ratios:
1st=3.333
2nd=1.955
3rd=1.286
4th=0.926
5th=0.756
Final Drive=4.167 (brochure), 4.176 (service manual). The service manual is correct while the brochure is incorrect and TCM never bothered to correct it for the Sentra FL2 and Sport brochures. I'm pretty sure it's never been corrected since the beginning! And how do I know which publication is correct? Well the service manual lists the following: Final gear teeth count=71, pinion=17. 71 divided by 17 will give you 4.176470588235294117647....

The USDM B15 SE had the following gear ratios: 2000-2001 B15 SE.. 4.437 (FD), 3.333 (1st), 1.955 (2nd), 1.286 (3rd), 0.926 (4th), 0.733 (5th). Compare, contrast and make your own assumptions!

6. The RS5F70 gearbox also comes with a LSD - Limited Slip Differential (not the drug!) variant. The gearbox with LSD fitted is RS5F70V. The LSD is of the viscous type hence the "V" designation. Needless to say the RS5F70A does NOT have a LSD.

7. Nismo did have an aftermarket LSD for the 70A gearbox once upon a time but this has been discontinued :( There are rumours the LSD for RS5F32A gearbox is the same and can be fitted to 70A gearbox. Who wanna be the first guinea pig to confirm this? I'll personally chiah you lunch if you confirm the theory above is correct or a bunch of hogwash. The Nismo LSD part number for 4.176 final drive RS5F32A gearbox is 38420-RS360.

8. Some useful links from SR20 Forum in regards to said gearbox. Excellent reading and knowledge material. Folks in this forum are pretty technical unlike some other Nissan forums.
"B15 tranny - why it's better than B13/B14"
"Disassembly of a B15/P11 tranny to install a friction type lsd"
"P11/B15 transmission swap into a B13/B14/P10"

I'll just stop at #8 for the time being before I bore you non-techies to death. Also you know how much we Chinese like the number 8 :) Hope the information has proven useful.

Dietary Supplements Part 2

The Slowtra has had even more fasteners replaced since the fuel hike. A lot of flab will have to go to hopefully improve the fuel consumption and power to weight ratio. Have decided to take the fasteners technology on the Slowtra to SP/motorsport levels of mod.

Bolts on the front headlight mount and radiator top mount brackets replaced with lightweight silver anodized aluminium items. 7075 aluminium is 60% lighter than mild steel and doesn't rust.

The bonnet latch bolts replaced with black anodized aluminium items.

Horn bracket mount bolts replaced with aluminium potassium bichromate items. Potassium bichromate coating is cheaper than anodizing but doesn't look as nice.
Radiator coolant overflow bottle mount bolts replaced with silver anodized aluminium items. Three bolts hold the bracket to the car's body but surprisingly only one bolt holds the bottle to the mounting bracket. There is a tab on the other end of the bottle and this tab slots into the hole on rectangle hole on the bracket.
Inlet manifold support bracket bolts replaced with aluminium potassium bichromate items. Likewise bolts holding the EGR plumbing.

I've much more fasteners on the car scheduled to be replaced with lightweight aluminium and some titanium items when my budget allows. Watch the Dietary Supplements series.

Nismo Badge Installed

I finally made some time for myself to personally install the Nismo badge. Took me bout 15 minutes including ensuring proper alignment. What do you think?

Closeup

I'd have to say the end results look good. Guess it better be at more than 400 smackers!

Black Thursday

I normally don't like to blog about politics but yesterday's announcement by our dear PM really made my blood boil. At a stroke the price of petrol went up by 78 cents to RM2.70 (40.625% increase!). How ridiculous can you get? To make matters worse most of Penang's jokers were actually putting our already slow traffic to a standstill in their efforts to rush to the petrol station to fill up before the price hike. Most of the roads with any semblance of a petrol station were filled to the brim with up to kilometres long of cars waiting to fuel up. Some were actually blocking the entry/exit of some roads in their efforts to queue up for petrol. Come on people! How much can you save?

I did a quick calculation of how much more I would need to spend on petrol and it came up to the following:

Currently am refuelling bout 40 litres every 1.5 weeks for my Slowtra. This means I’ll hafta refuel approx 35 times per year.

This would make my fuel costs

Yesterday
(40 X 1.92) X 35 = RM2688

Today
(40 X 2.70) X 35 = RM3780

Difference = RM1092

Deduct the RM625 rebate promised by our dear Gov and this means that I would be paying extra RM467 per year or RM38.916666666 per month.

Which doesn't sound that bad until you hear that Tenaga Nasional is to raise electricity rates by 18% for home users. This will then likely spiral the price of everything else upwards. Went for lunch earlier today and a bowl of large koay teow ting immediately went up to RM3 from RM2.50. Unscrupulous or Unbelievable! On top of that I''ll be moving to my new house soon which will mean that my new mileage will be approx 40% higher. Double Ouch! Now excuse me while I go sulk in a corner..

SR20 Forum's Excellent Suspension Faq

The SR20 Forum has one of the most comprehensive suspension faqs around. Lovely stuff! Everything you wanted to know about modding the N16's suspension is listed in the faq. The link to the faq can be found here!

In case you need a rehash the USDM (US Domestic Market) B15 chassis code Sentra is practically the same as our N16.

If you want to mod your N16's suspension and don't know where and how to begin do yourself a favour and spend some time to properly read, understand and digest the faq. If you have questions you can always ask me and I'll try to answer to the best of my ability. Now where can I find someone to bend my rear beam in Bolehland?

Nismo Badge Here!

This just came in a couple days ago courtesy of Bro EJ! Would like to thank Bro EJ for taking the time to source this original authentic Nismo badge as found in Nismo project cars in Sashimi-land. The badge's not cheap (RM400++) but gotta be worth at least 50bhp from the looks alone!

Looks good enough to lick! Question now is where should I place it? Was thinking of same place where my "1.6 VTC" badge used to be. Any suggestions?

Nissan Sentra Sport Edition

This is what TCM is trying to do to push off the remaining stocks of everyone's favourite but ageing N16. Why TCM would want to call this the Sentra "Sport" is beyond my logical reasoning. Pictures of the brochure below

Now on to the million dollar question. What "sporty" changes did TCM make? The changes are... drumroll please!

• "Smoked" headlight and rear lights
• Black tricot seat fabric
• Insulation/upholstery on rear trunk lid removed
• Only the top and bottom rows of the front grille are chromed. Rest is painted a metallic greyish tinge
• No bird maple panels on centre console (less plastic trees to kill?)
• No rear seat centre arm rest
• Different design wheels but still puny sized 14 X 5.5"
• No UV-Cut glass
• Rear "Sport" badge stolen from the Latio Sport

And the Real Performance Mods are....

• Unfortunately a Big Fat ZERO unless you consider a very very very slightly better power to weight ratio from the deletion of the rear arm rest and rear trunk lid insulation.

Lastly the only thing that makes your heart beat faster on the "new" car is it's price!

• Sentra Sport 1.6M = RM85,750.00
• Sentra Sport 1.6A=RM89,800.00

Last I knew my better N16 cost roughly the same. Ouch! Sorry for coming across as a frustrated old fart but that's how I feel about the Slowtra Sport edition which is even worse than the Nismo edition. What a big fat shame!

Slowtra's First Dyno Charts

Here are the long awaited dyno charts from the Slowtra's baseline dyno back in December. I apologize for the long long wait but I had practically zero time to blog till the current CNY hols.

Pix below of the power curve and output figures below. The curve very closely resembles what TCM shows in the Sentra brochure. The 25k km mileage engine's bone stock cept for Heat Range 6 ND Iridium plugs and a K&N drop-in element replacement filter. Figures are all at the crank.

The torque curve and output figures

As you can see from the power and torque curves there's a very pronounced dip between 3500rpm to 4000rpm. Most people actually feel this deep as a surge of power thinking the engine's VTC is like VTEC. Wahahhahaha! This proves once again that butt dyno's are only good for feeling power/torque transitions rather than gains. I have a set of Hot Bits stainless steel headers and exhaust b-piping on order. This should hopefully get me some gains and

reduce the dip in the curve...

Happy Chinese New Year 2008!!!

First off I would like to wish all fellow Chinese a Very Happy and Prosperous New Year!!! May 2008 bring as much cheese as possible for you and the N16. 2007 has been the toughest and most challenging year of my life balancing between finances, work, personal, the Slowtra and the shag pad. Here's hoping for a better 2008!!!

Nismo Badge

Yes I know I'm getting ricier by the day but does anyone have the leads to get the Nismo badge below? My contacts in JDMland is telling me this badge is not for sale and only found in Nismo factory/project cars.
I just need the Nismo badge. Don't need the "Z-tune". If this cannot be had I also don't mind a similar looking badge (just different "O" alphabet treatment) found on the Latio Tiida S-Tune. In all honesty a proper badge looks so much better than a sticker decal. Nismo Japan online website only lists the following badges

I don't mind having the above badges if these were at least 50% larger. At only 100mm width X 28mm they're way too small...

Chit, Chit Chit! - Birds in my Engine Bay?

The Slowtra's bloody aircond/power steering belt squeaks like a hungry/horny bird? whenever the engine's cold. The chit, chit, chit is driving me crazy and the sound is getting more persistent by the day. I previously changed to a Nissan Key Value (Made in Japan second grade parts) belt on recommendation from TCEAS and all was well for bout 5-6 months before the sound came back. Damn!

Checked with fellow Slowtra owners and apparently this problem is nothing new for the CKD Sentra. Everybody suffers from it. Anybody got kangtao for Nissan Bluebird Sylphy G10 belts direct from Japan? Apparently this is the only cure.